Just a double check, are the messages still arriving at your application?
Is it only a problem in our portal?
Posts made by afzal_m
-
RE: No messages incoming in the api
-
RE: Application Server
It took some time, but we’ve tested it and it should work again
-
RE: No messages incoming in the api
Hmm can you check if it helps when you add and remove a dummy IMEI via the GUI?
https://dyrk.org/tools/imei/
-
RE: eSIM and NB-IoT
No eSIM, but we do have the following available:
- MFF2 sim-on-chip
- nuSIM (the sim profile integrated in the cellular module)
-
RE: When are we getting non-NeulMessenger CoAP?
Good question!
Not later than February 2021.
-
RE: BC 95 G Reboot problem
That’s odd. This is the first time that I hear about this problem.
CFUN=1 means switchting on the radio module.
Maybe a capacity or power issue on the device?
-
RE: BG96 sim error
Hey Sergey,
We do not have IMSI - IMEI lock configured. All our simcards should be able to work in mutiple devices. I double checked your sim-card configuration as well.
We do have some users who connected the nrf9160 via UDP…
@Eric-Barten (but he’s offline this week) and @Stefan-de-Lange
-
RE: BG96 sim error
Thanks for the insight!
I’ll send you a new sim-card then.
-
RE: BG96 sim error
Thanks! Just checked your sim-card settings and, everything looks fine from here.
Can you try it like this:
AT+COPS=1,2,"20416",9
I have to admit, I have no clue what the ‘9’ does. However, this is how @Roalnd-Baldin wrote it here in our doclib.
-
RE: BG96 sim error
Hmm maybe! Can you send me the ICCID or IMSI via DM here?
-
RE: BG96 sim error
Usually this really means that there 's still something wrong with reading the sim.
Can you please try what happens after removing and replacing the simcard in the card-holder?
-
RE: Application Server
I think that you did everything right. Something has changed at All Things Talk’s end. We received more complaints about integrations with ATT.
@Eric-Barten already contacted them, but I will give it another try next week.
-
RE: How to get your nuSIM dev-kit online?
@Sergey-Vladimirov thx for your enthusiasm!
For now only Quectel and Telit are “nuSIM - ready”. But soon more module vendors will be ready as well.
Check out: https://iotcreators.com/en/nusim/
PS. you also sent an e-mail with another question and we’re trying to get back to you but it looks like your inbox is not accepting new messages
-
How to get your nuSIM dev-kit online?
If you’re one of the lucky ones who received a nuSIM dev-kit from my colleagues Mona Parsa and Stefan Kaliner, you’re at the right place to find out how to get this super cool dev-kit online without a plastic simcard!
STEP 1: GET YOUR STARTERKIT PROJECT
Before using the dev-kit, you’ll need a starterkit project environment.- Sign-up for it by using this link.
- When you’re asked about where to send the simcard select the checkbox of I already have simcards
STEP 2: GET YOUR DEV-KIT ONLINE
- Go to your project
- Register the IMEI of your device
- Attach to the network by using
cdp.iot.t-mobile.nl
as APN and172.27.131.100
as gateway for a ping test or to send your uplink messages - Your uplink payload should appear in the ‘device management’ tab of your project page
- If you do not know how to attach to the network, check out the AT-commands below
AT-COMMANDS TO ATTACH TO THE NETWORK
Switch-off the radio module
AT+CFUN=1
Configure basic connectivity parameters
AT+NCONFIG="AUTOCONNECT","TRUE" (this doesn't work) AT+NCONFIG="CR_0354_0338_SCRAMBLING","TRUE" AT+NCONFIG="CR_0859_SI_AVOID","TRUE"
Set the APN
AT+CGDCONT=0,"IP","cdp.iot.t-mobile.nl"
Set the band
AT+NBAND=8,20
Select the Operator
AT+COPS=1,2,"26201"
Telekom Germany = 26201
T-Mobile Netherlands = 20416
T-Mobile Poland = 26002
Or use the PLMN ID of any other operator within our NB-IoT roaming footprintReboot to save the settings
AT+NRB
After restart (OK)
Turn on some informative feedback to see the connection process
and reinitializeAT+CMEE=1;+CSCON=1;+CEREG=5 AT+COPS=1,2,"26201"
After not more than 30 seconds, your device should be attached to the network.
Now you can proceed with registering the IMEI number of the module in your starterkit-project and send yourHello World
uplink message!To follow the AT-commands below, it is important that you register the IMEI as UDP.
AT-COMMANDS TO SEND YOUR UPLINK
Open local UDP-socket
AT+NSOCR="DGRAM",17,7000,1
Send your uplink-message (2x)
AT+NSOST=0,"172.27.131.100",15683,11,"48656c6c6f20576f726c64"
Make sure to send it twice, in order to see your message in your starterkit project.
That’s it!
Feel free to reach out in case of any questions!
-
RE: BC95-G, I don't get assigned an IP address
https://docs.iotcreators.com/docs/_-setup-sodaq-sara-aff-n211
Can you check of these commands help?
Sara N211 = same chip as Quect BC-95
-
RE: Sending data with NB IoT from Netherlands to Turkey
@Mert-Karabagli with simcards from iotcreators.com you can indeed only send your UDP traffic to our own Service Capability Server (172.27.131.100). In the portal you can specify your callback URL to collect the device data via webhook/throught http posts.
If you need a simcard with which you can send data directly to your own server, pls reach out to iot@t-mobile.nl and theyt can give you access to the ‘easy connect’ platform.
In the future we will also support this in the iotcreators portal but for now it is a separate solution.
-
RE: Limited Data Rate after to many messages on aday?
Yes, but so far it is just a recommendation. On radio network layer nothing happens if you exceed it.
But I don’t know what happens on a higher layer with 1NCE simcards. Sorry
-
RE: Amazon Web Service (AWS) via NB-IoT or LTE-M ?
Hi Holger,
If the simcard comes from iotcreators.com, you just need to follow this instruction: https://docs.iotcreators.com/docs/integrations
But if you got the simcard directly from Telekom Deutschlan, I’ll have to ask a colleague.
-
RE: Limited Data Rate after to many messages on aday?
Hi Timo. It depends. Where did you get your simcard? If you got it from iotcreators.com then, yes, there is a guideline of 120 messages per day max.
However, currently there are no technical limitations and no financial implications.
-
RE: ATT URL error
That’s odd, then we’ll have to wait for @Eric-Barten
I will notify him tomorrow morning!