1. Home
  2. Network, Coverage and Hardware
  3. BC95-G, I don't get assigned an IP address

BC95-G, I don't get assigned an IP address

  • T

    Hello,

    I’m trying to complete the Hello World with a BC95-G but I never get an IP address. I’m located in Germany and I am using an iotcreators Sim Card.
    AT Commands PDF

    My Commands:

    ATE1
    OK

    (I didnt find a command to disable auto sleep)

    AT+NBAND=8
    OK

    AT+CFUN=1 (The iotcreators guide sets it to 0, but the next two commands wont work if CFUN is 0)
    OK

    AT+CGDCONT=1,“IP”,“cdp.iot.t-mobile.nl”
    OK

    AT+CGACT=1,1 (Activate PDP Context)
    OK

    AT+CIPCA=3,0 (Initial PDP Context activation)
    OK

    AT+COPS=1,2,“20416”
    OK

    AT+NRB (Reboot device)

    Afterwards I should get an IP address but nothing is happening. After Reboot the PDP Context which I set with CGDCONT is also deleted.

    Thanks for any help.

    0
  • afzal_m
    Deutsche Telekom IoT

    https://docs.iotcreators.com/docs/_-setup-sodaq-sara-aff-n211

    Can you check of these commands help?

    Sara N211 = same chip as Quect BC-95

    1
Log in to reply