Reading IMSI using the API

MeneerJacco

I was wondering if the IMSI number can be read using the API, as it is visible in the portal.
Or do I need to read it myself on the device and send it in the payload?

Olivier Carmona

Hi,

currently it is not possible to query the IMSI of a device via the API.

BUT
the IMSI is delivered along with the lifecycle event when the device registeres it self.
In this case you get forwarded to your configured application url a payload like this.

{
  "reports": [
    {
      "serialNumber": "IMEI:123456789012345",
      "timestamp": 1623278710492,
      "subscriptionId": "63b07b01-4c14-4bba-8bc4-f3a89b3c94ff",
      "resourcePath": "uplinkMsg/0/data",
      "value": "500a060800101a181",
      "customAttributes": {}
    }
  ],
  "registrations": [
    {
      "deviceType": "device",
      "serialNumber": "IMEI:123456789012345",
      "timestamp": 1623278710457,
      "make": "Generic",
      "model": "Sensor",
      "groupName": "TMNL.PROFESSIONAL.CON_0000001204",
      "imsi": "N/A",
      "protocol": "HTTP",
      "tags": "N/A",
      "subscriptionId": "cc48f3fa-7147-4b6d-9fe7-fe5b108e50dc",
      "deviceProps": {
        "device/0/imsi": "IMSI:123456789012346",
        "device/0/model": "Sensor",
        "uplinkMsg/0/data": "500a060800101a181",
        "device/0/manufacturer": "Generic",
        "connectivity/0/port": "62509",
        "connectivity/0/mncmcc": "",
        "location/0/longitude": "",
        "connectivity/0/cellid": "",
        "connectivity/0/ip": "10.0.5.183",
        "location/0/radius": "",
        "connectivity/0/rat": "",
        "location/0/latitude": "",
        "connectivity/0/apn": ""
      },
      "customAttributes": {}
    }
  ],
  "deregistrations": [],
  "updates": [],
  "expirations": [],
  "responses": []
}

You can see the IMEI in the IoT Creators portal because we did some implementation regarding this :)

Hope this helps a bit.

Regards, Roland