NB-IOT gps Postman issue
-
Hi all.
I don’t manage to see gps data within Postman interface by the ‘nbIOT_gps’ sample. Is it about the format code?
However, I am able to see it into my serial console.
That’s what I got on my Postman interface.
-
Now, using the Sodaq_Nb-iot_All_sensor sketch from Sodaq library, I got the following data into the Postman interface ( serial console got proper upcoming data).
If I decode that data from Base64, the result doesn’t make any sense.
Thank you
-
Hi @tonibco in the sketch you mentioned you can find the definition of HEX bytes that you have sent. These HEX values corespond to the base64 decoded HEX values.
- device decoding:
“sense”: [
{
“asset”: “my_temperature”,
“value”: {
“byte”: 0,
“bytelength”: 2,
“type”: “integer”,
“calculation”: “val / 100”
}So the first HEX number is the temperature * 100
