@Kurosh
I don’t see the URCs arriving at your screen. As described in my last message, please configure your URC port.
If it is configured correctly you should see something like this:
ate0
ate0
OK
at+cfun=0
OK
at+qcscon=1
OK
at+cereg=2
OK
at+cfun=1
OK
+CPIN: READY
+QUSIM: 1
+QIND: SMS DONE
at+cops=1,2,"26201",8
OK
+QCSCON: 1,1
+CEREG: 5,"6F55","18CB40E",8
+QCSCON: 1,0
+CEREG: 5,"6F55","18CB404",8
Notice that the +QCSCON: 1,1 and +CEREG: 5,“6F55”,“18CB40E”,8 pop up automatically.
Also right after turning on the radio with AT+CFUN=1 you can see
+CPIN: READY
+QUSIM: 1
+QIND: SMS DONE
popping up automatically. I dont see that in your logs. Please configure your URC port and issue the commands as I’ve shown in the example here.
Best
Yassine
