@Kurosh

I don’t see the URCs arriving at your screen. As described in my last message, please configure your URC port.
If it is configured correctly you should see something like this:

ate0 ate0 OK at+cfun=0 OK at+qcscon=1 OK at+cereg=2 OK at+cfun=1 OK +CPIN: READY +QUSIM: 1 +QIND: SMS DONE at+cops=1,2,"26201",8 OK +QCSCON: 1,1 +CEREG: 5,"6F55","18CB40E",8 +QCSCON: 1,0 +CEREG: 5,"6F55","18CB404",8

Notice that the +QCSCON: 1,1 and +CEREG: 5,“6F55”,“18CB40E”,8 pop up automatically.
Also right after turning on the radio with AT+CFUN=1 you can see

+CPIN: READY +QUSIM: 1 +QIND: SMS DONE

popping up automatically. I dont see that in your logs. Please configure your URC port and issue the commands as I’ve shown in the example here.

Best
Yassine