keep getting +CME ERROR: 30
-
I have the new starters packket and a new SODAQ SARA board but using the example sketches (with a bit of extra debug from me) I can’t get past this error
I used the example UDP sketch
-
This post is deleted! -
Hey Jonathan, are you using one of the 3 new sicmards? If yes, these 3 are faulty. My colleague sent these to you by mistake,. You can just use one of the old simcards. It will also work in your new starterkit environment.
-
Ill try it in the morning.
-
Yup - worked
[rdResp]: +CPSMS: 1,“01000001”,“00000101”
[rdResp]: OK
[rdResp]: +NPING: “172.27.131.100”,253,654
[rdResp]: timed out
Initializing and connecting… SENDSending message through UDP
[rdResp]: 0
[rdResp]: OK
Created socket!
[rdResp]: 0,4
[rdResp]: OK
Length buffer vs sent:80
[rdResp]: OK
[rdResp]: OK– should you send me new sim cards then for the starterspakket??
-
@afzal_m so - here is a more serious question :
In this case I have to register the IMEI in the portal using an API; the IMEI is the ID of the MODEM and not of the SIMCARD. I had assumed that we would manufacture boards in quantity and then then , just like a phone, whichever SIM card you put in would give the device its identity, its carrier, its commercial conditions. From what I see here the SIM card does not matter , it is the IMEI of the modem? Or am I getting this completely wrong?
-
@jonathan-carter said in keep getting +CME ERROR: 30:
From what I see here the SIM card does not matter , it is the IMEI of the modem? Or am I getting this completely wrong?
No, you are right!
The simcard is the key to our radio-network and your device is the key to our IoT-network. Hence, the identification is based on the IMEI no. of the modem.@jonathan-carter said in keep getting +CME ERROR: 30:
I had assumed that we would manufacture boards in quantity and then then , just like a phone, whichever SIM card you put in would give the device its identity, its carrier, its commercial conditions.
This is also possible on our network. However, we did not implement it yet. Please get in touch with me when this will become urgent for your case(s)!
