No messages coming to the GUI portal



  • Hi,
    I’m working on university team project in Slovakia using your Starter Kit SIM card. On 21th of October I was able to send message to your server and see payload in GUI portal. But last few days I can’t see any messages coming to my GUI. It’s strange, because I use the same AT commands as the first time. Could somebody help me, please?

    Device is connected to network and has it’s own IP address.

    AT
    OK
    ATI
    Manufacturer: u-blox
    Model: SARA-R410M-02B
    Revision: L0.0.00.00.05.08 [Apr 17 2019 19:34:02]
    SVN: 02
    IMEI: 352753090564061

    OK
    AT+COPS?
    +COPS: 1,0,“231 02 Telekom.de”,9

    OK
    AT+CGATT?
    +CGATT: 1

    OK
    AT+CGDCONT?
    +CGDCONT: 1,“IP”,“cdp.iot.t-mobile.nl”,“10.0.4.101”,0,0,0,0

    OK
    AT+USOCR=17
    +USOCR: 0

    OK
    AT+USOCO=0,“172.27.131.100”,15683
    OK
    AT+USOWR=0,5,“test!”
    +USOWR: 0,5

    OK
    AT+USOCL=0
    OK

    If there is something else I can try, let me know.

    Thank you very much.



  • @afzal_m hi, probably you could know what is the problem… does it have something to do with problem on your side I read in another topic?


  • Deutsche Telekom IoT

    Hi Roman,

    Yes, this has something to do with a problem that we had on Satuday October 23rd.

    The good thing is: the problem only affects in the ‘last payload’ functionality in our GUI. If you connect your own application/paltform to our API, you should be able to receive all your device data.

    I will post another update tomorrow.



  • @afzal_m thank you, I wait for update post



  • This post is deleted!

  • Deutsche Telekom IoT

    Can you please check again? We fixed a few things 🙂



  • @afzal_m Yes, I tried it few minutes before you wrote here 🙂 and it works!

    Thank you very much, we can continue in our small project…