Add LoRa GW
There is a possibility to hook up LoRa devices and gateways to the iotcreators portal (see also Uta’s LI message (https://www.linkedin.com/posts/ugcPost-6858351496111648768-8UzE)
My understanding is that you have the LNS up and running and I have to add my LoRaWAN gateway. In order to prepare I would like to know which protocol between the GW <-> LNS is used and what other info your require?
Hi @jeroen-van-bussel in our environment we host a LNS. Therefore you don’t need to care about this one. Next thing to consider: the LoRa GW. We’ll register it for you once before you start with LoRa. See here a list of GW we support. Please get in touch with us via lorawan (at) iotcreators (dot) com to discuss the registration details. Then you’re ready to go: Register a LoRaWAN device in your project in our portal and it will be registered automatically in your GW and ready to use.
DocLib article: https://docs.iotcreators.com/docs/integrate-lowawan-devices
Fineprint: Please be aware that we provide the LoRaWAN integration only for non-commercial and validation use.
@uta I dropped you a couple of lines in an email
FYI - we managed to get our LoRa gateway to hook up with the IoT Creators’s LNS
@jeroen-van-bussel it’s great to hear
NB-IoT and LoRa - partners in crime