Thanks!
And have you tried it this way already? https://docs.iotcreators.com/docs/integration-with-allthingstalk
Thanks!
And have you tried it this way already? https://docs.iotcreators.com/docs/integration-with-allthingstalk
Can you confirm that it is still possible to add/remove devices in the same project?
Hi Peter,
could you successfully register the callback URL of Beeceptor in your Project?
If you save your “Callback URL” in the portal it sends an empty POST to the URL and expects an 200 as response.
If no 200 is returned the URL is not stored and by this data message can not be forwareded.
Could you please send your account name and your EMEI to iotcreators@telekom.de ? I can verify if the message has been received.
Please don’t post those infos to the forum.
Regards, Roland
@rgb93 before april 2018 the Neul Messaging Protocol was a Huawei Ocean Connect propietary protocol.
But later the later on they made the source code available to us. We used the same source code to create the Neul Messaging Adapter in our Service Capability Server.
So if the error says that there is no connection to the Huawei platform, it simply means that there is no connection with our Neul Messaging adapter. Pls send me your IMEI number and group name (CON_00000xxx) by e-mail or DM and I will check it.
@rgb93 said in Is there any way for my device to know if a packet it has sent has been received?:
Can you provide me the ‘adaptationLayerName’?
TMNL_COAP_AL
Yes, you have to delete it and add it again as CoAP device
Tbh, still not sure what this CME ERROR means. I often see it coming back on the forum, I also see that people solve it afterwards. But how, that’s not clear.
I myself got this message when I used commands that the modem didn’t recognize.
However, I am very sure that when I used the Quectel BC-95 two years ago, it really worked with AT+NCDP and AT+NMGS… maybe you should try it with quotation marks
e.g. AT+NCDP=“172.27.131.100”
Our Service Capability Server (what you refer to as CDP) does support Neul Messaging. It has an UDP adapter and a Neul Messaging adapter. In our portal and documentation we often (wrongfully) refer to Neul Messaging as CoAP. So that is maybe confusing.
I know of at least 3 customers who are using Neul Messaging on our network. One of them is @magnatron
It took some time… But it’s finally fixed!
Pls be aware that it can take up to 5 minutes before you see your last payload in the GUI. It is just a workaround, we are still working on the final solution.
Thanks for sharing your use case! It’s really helpful.
We will gather some more feedback this month and then we will announce some next steps at the end of september!
Ok, here it is:
If you want to use the Quectel BC-95 or U-blox SARA N211 with Neul Messaging (Huawei propietary CoAP), just use these commands and add this command: AT+NCDP=172.27.131.100
to send your uplink payload use:
AT+NMGS=yourpayload
If you want to use the BC-95 you can use the same AT-commands at the U-blox SARA N211 we have it here: https://docs.iotcreators.com/docs/ii-network-attach
But these are the commands for UDP. If you want to use the Neul Messaging protocol the commands are little bit different. It is two years ago that I used neul messaging for the last time. Let me try to find the commands for you
No the BC-95 only works with the Huawei version of CoAP (neul messaging).
ah that’s awesome new Aleksandra!! Didn’t know that
Hi IoT friends!
A frequently asked question is the possibility to provide location services for NB-IoT to avoid the necessity of GPS. (Since GPS is reducing the battery life).
There are several ways to provide NB-IoT location services. And there are also several use cases which require location services.
I’d like to learn more about how our users want to apply location services.
E.g.
Would you like to share here what you want to use location services for? Please also tell us more about the accuracy and if you need the information real time, a couple of times per day, every 5 minutes etc.
Thanks!
@rhalflex
Belgium is not part of the current roaming deal, but we hope to have it with Orange Belgium before 2021.
LTE-M is still in a try-out and experimentation phase for us. Please send me your simcard number in a direct message. We can change it to multimode and we’d love to hear your experience afterwards.
hmm no volunteers
So just send it to us. Will send you the address in a dm
Unfortunately not yet. Still working on a fix.
Hi Derko,
That is very inconvenient
We just changed something, can you please let us know how it works now?
We’re still working on it., sorry that it is taking so much time
Very cool! But we should have roaming in UK…
Wouldn’t you rather test it yourself?